Description

The Victor M325 Holdfast mouse trap is a “traditional” mouse trap with a little something extra. The original wood-based wire snap trap now has a large scented plastic trip pedal. No need to bait with a cheese scent made right on the trip pedal! The Victor M325 mouse trap is made with FSC certified wood. Trap measures 4″L x 1 3/4″W. Victor snap traps work very well and kill mice instantly. If you do choose to use a bait, snap traps work best when baited with sticky bait (i.e. peanut butter). HOW TO SET THE TRAP: 1. Pull the bow (the spring loaded part) back, holding it down with the thumb of one hand. 2. With your other hand, take the locking bar (the long arm with the curve >in the end that is attached to the back of the trap) and lay it in the center of the spring. Make sure that the curved or cupped part faces downward. 3. Begin to tilt the cheese pedal upward. As you do, you’ll notice that the tip the locking bar will engage inside a little box-like opening on the back of the cheese pedal. 4. Slowly release your grip on the bow, the force of which should hold the locking bar inside that little box on the pedal. The trap is now set. 5. There is an “S” and an “F” imprinted on the pedal itself. If you wish the trap to be more sensitive, position the locking bar towards the “S” side of the little box by sliding it that direction. “F” stands for firm (less sensitive). How to Use Snap Traps Effectively: Most trapping efforts fail because too few mouse traps or rat traps are used. You’ll probably need more traps then you think. Set enough traps to kill most of the population before the rodents begin to shy away from the traps. We recommend placing the traps every 2-3 feet along a wall, with the trap placed perpendicular to the wall. Rodents enter a home through holes the size of a dime and run along walls, not over open spaces. 1. Place traps perpendicular to the wall. 2. Place traps out unset, without bait, for a few days (even 1-2 weeks) so rodents can

Additional information